Why People Don't Care About Ghost Immobiliser Car

· 6 min read
Why People Don't Care About Ghost Immobiliser Car

BMW Ghost Immobiliser

The Ghost utilizes the CAN data bus to communicate with your vehicle. This prevents thieves from putting in a new key or even replacing the ECU to get around your security system because it requires a correct PIN code to start the engine.

The Ghost is unlike other immobilisers as it doesn't rely on key fobs or LED indicators. Instead, it uses the buttons in your vehicle to allow you to enter a specific disarm sequence that you only are aware of.

Stop & Start

If you've been in a BMW or used its stop-start feature you may have noticed the engine continues to run for 30 seconds after you have released the brake pedal. This is due to the BMW engine management system constantly monitoring your vehicle for signals from the ignition key, and if this signal is detected, it will keep running. The Autowatch 2 Ghost immobiliser prevents this from happening by stopping the car every time you press a button.

Our BMW ghost immobiliser is an innovative next-generation device that doesn't require cutting OEM wires or adding an aftermarket alarms or key fobs. It is connected to the BMW's CAN data network and programmed with a secure, unique PIN code which is accessible via buttons that are installed in your car. This lets you enter an exact key-push sequence that is not present in the standard media menus, such as volume up/down and source, cruise control or aircon on and stops your car from starting unless it is entered. The PIN could be between 4 and 20 digits which makes it extremely difficult for thieves to determine or crack.

In addition, we can also add a service/ valet mode to the system. This is activated when your vehicle is in for servicing so that the Ghost remains hidden from the garage. This can be done by pressing the service button on your infotainment device 5 times (the system will flash to confirm this) and when you return the Ghost will re-arm automatically.


Ghost immobilisers are highly recommended for top-of-the-line vehicles. It is completely unnoticeable and doesn't require cutting any original factory wiring and can disable the engine of your vehicle when a wrong pin code is entered. It's a simple, yet effective method of preventing your car from being taken even with a cloned key. You just need to check out social media sites to see how quickly brand-new vehicles are stolen using cloning equipment which is available to anyone who is online for less than PS80.

Service / Valet Mode

The Ghost is a market leading immobiliser designed to prevent your vehicle from being taken by key cloning or hacking. It uses the factory buttons of your vehicle to generate an individual push sequence that only you can identify. This is similar to pin code security for your mobile phone. It's incredibly secure, discreet and can deter even the most determined thieves!

If you are parked at home or in the event of a meet and greet when you are at a meet and greet, the Ghost can be set to service mode, which allows you to start your car using your keys as normal however it stops the engine from running until the proper code is entered. This is great for customers who must hand over their cars to valet service companies or trusted family members or friends. This allows you to bring your vehicle to the garage for servicing and maintenance, etc. without having to worry that it will be tampered with by a mechanic while you wait.

If the service/valet mode has been activated, your BMW will not be able to drive once it has been started. This will stop anyone else from testing driving the vehicle while you are away. After you return, it will return to normal stopping your vehicle from being tampered with or stolen again.

We can mount the Ghost to any BMW, all you need is the correct keys as the device does not use the original remotes, and can be used alongside them. We are TASSA-registered, DBS-security-checked and fully trained in system installation. You can be confident that the installation will be completed correctly and your Ghost device will work as intended. Also, you will receive documentation that you can present to your insurance company. They are awestruck by these devices, and often offer substantial discounts.

We can also provide an optional Bluetooth tag that can be used to disable the Ghost via an App on your smartphone (IOS and Android) or in the event that you don't own a smartphone or aren't familiar with it, just press the emergency card one time. This is an additional cost and requires an additional Bluetooth pairing.

Anti-Hijack

With the advent of high-tech thieves becoming increasingly advanced, the technology in security systems has to evolve, this is why Ghost has created this subtle and unobtrusive immobiliser. It is designed to stop thieves from putting in an ignition key or replacing the ECU to start your vehicle and drive off. Ghost connects to your CAN data network, and utilizes the buttons on your vehicle (steering wheel and centre console as well as door panels) to create a unique push sequence that requires to be entered before the engine can start.

This will activate the anti-hijack function and once active any attempt to start the engine will be immediately blocked. If the system detects that the vehicle is no longer moving, it will honk the horn and flash the indicators, if it is unable to identify the correct code it will also stall the engine (where possible). By entering your push sequence or entering service mode, you can disable the Anti-Hijack function. This allows your vehicle to start temporarily without the need to enter PIN.

If  ghost immobiliser birmingham  own a GPS device connected to your BMW it could be used to disable the Anti-Hijack feature, allowing you to still use the navigation system inside your car whilst the vehicle is parked and not being watched. You can also use your smartphone to control the anti theft feature and other functions.

The product is certified by Tassa and is recognized by a majority of insurance companies. It will reduce the chance of your joy and pride being stolen. It is completely discrete and will not interfere with the functionality of your vehicle. It doesn't require any programming expertise to install or use. It is totally undetectable by tools for detecting that thieves employ, and it is immune to key cloning as it connects directly to your vehicle's CAN data network.

Remote Control

We can connect the Ghost device with your mobile app to enable remote control of keyless start and go functions. This is helpful when you are else and valet or mechanic need to start your vehicle. The system allows you to turn the car on by selecting drive and then exit service mode without needing your key fobs. You can also see your vehicle in real-time on a map using your smartphone, ideal for tracking your car whilst moving around.

The Ghost can be positioned in the dashboard area, or in the center console. It is completely hidden, tamperproof, and does not need any additional wiring. The device is connected to the CAN Data Network of the vehicle (similar to an Ethernet cable) and a personal pin code is programmed in it. This pin code must be chosen before the vehicle starts. This prevents thieves from using a cloned key or replacing the ECU in order to bypass this system.

If the vehicle is stolen in any way, the Ghost will enter a service mode and disables all functions unless a PIN code is entered or you make use of the mobile app to disarm it. This is a feature that was developed to safeguard your vehicle from high-tech thieves who are using relay boxes to steal your vehicle. It also prevents thieves from using their mobile phones to activate your sat nav or MP3 player to track your vehicle!

Ghost can also stop "Relay-style Frequency Amplification". This is the most common method of stealing a vehicle with a keyfob which has been copied, or stolen by hacking. Ghost lets you stop this theft by installing a device called Secure-A Key inside your vehicle. The device is installed inside the key-fob of your vehicle and shuts off its battery after a few inactive minutes. This is possible using the most modern PKE keys.

We are TASSA accredited (Tracking and Aftermarket Security Systems Association) A recognized body that insurance companies recognise and offer discounts for when you fit the device. We are also DBS security-checked and fully trained to install the Ghost and ensure that all work is completed to the highest standard. You will receive documentation that you can present to your insurance company to prove the installation. This will allow you to get the best price on your car insurance.